针对不同地质目标的叠前时间偏移成像解释评价

随着计算机硬件和地震勘探成像技术的发展，叠前时间偏移正逐步替代常规的NMO加DMO加叠后时间偏移成为地震数据成像处理方法的主流。但对于不同的地质目标，叠前时间偏移的成像效果是否优于常规NMO加DMO加叠后时间偏移的成像效果呢？为此，从地震数据成像处理方法、处理流程和处理参数等方面进行了讨论，并基于某地区三维数据常规处理结果和叠前时间偏移处理结果，针对不同地质目标进行了剖析与评价。认为：叠前时间偏移成像的垂向分辨率较常规处理明显降低，但对于空间波阻抗变化明显的河流和断层，叠前时间偏移成像的空间分辨率要高于常规处理；对于小于1／4波长的叠置薄储层，叠前时间偏移成像的垂向和空间分辨率低于常规处理结果。     

快速色谱分析技术在油气勘探中的应用

文章通过对五口井的现场应用介绍，阐述了快速色谱分析技术在油气层识别和解释方面的准确性，探讨了该技术在薄油气层的发现和评价、快速钻进条件下油气层的发现、对油气层全烃组份变化的统一、水平井的地质导向以及排除钻井液添加荆对油气显示的影响五个方面的优势，从而论证了快速色谱分析技术在油气勘探中的应用价值。     

柴石滩电站计算机监控系统配置及主要功能

柴石滩水库坝后电站装机容量３×２０ＭＷ，水库库容４．３７亿，坝高１０３．２ｍ，电站采用计算机监控为主简易常规监控为辅的方式。本文介绍了电站计算机监控系统网络结构及系统软硬件配置以及监控系统功能、特点，简易常规监控方式。电站监控系统采用招标方式已定了生产厂家和系统方案。     

论普通型胶辊表面不处理的合理工艺参数

论述了普通胶辊表面不处理的性能特点和存在问题，技术措施和合理工艺参数，提高了成纱条干水平，减少缠绕和磨损。     

Modular implementation of efficient self-checking checkers for the Berger code

A technique for designing efficient checkers for conventional Berger code is proposed in this paper. The check bits are derived by partitioning the information bits into two blocks, and then using an addition array to sum the number of 1's in each block. The check bit generator circuit uses a specially designed 4-input 1's counter. Two other types of 1's counters having 2 and 3 inputs are also used to realize checkers for variable length information bits. Several variations of 2-bit adder circuits are used to add the number of 1's. The check bit generator circuit uses gates with fan-in of less than or equal to 4 to simplify implementation in CMOS. The technique achieves significant improvement in gate count as well as speed over existing approaches.     

Global insight into microwave stoneware firing: Macro and microstructural changes

Industrial competition and environmental concerns lead to the exploration of alternative and energy-efficient technologies for ceramic materials processing. The main objective of this work was to present microwave heating as a viable option for stoneware processing. Stoneware functional properties are presented and discussed, with emphasis on impact strength, water absorption, porosity, and color. Microstructure analyses show that microwave- and gas-fired samples have higher densifications than electrically fired samples. A relevant finding for processing conditions is that microwave firing requires temperatures approximately 100°C lower than those required by conventional firing. Microwave-fired samples’ rupture energies are approximately twice (0.57 ± 0.06 (J)) those of the reference samples (0.26 ± 0.03 (J)), and their water absorptions are approximately one-half (1.5% at 1170°C and 0.8% at 1190°C) of those of the reference samples (2.0%), whereas the water absorption of electrically fired samples at 1180°C has been estimated to be 7.5%. Color analysis also evidences a shift to lower microwave firing temperatures, what is attributed to the enhanced transformations promoted by microwave heating when comparing with the transformations promoted by conventional (gas or electric) heating.     

煤粉炉粉煤灰提取氧化铝活化技术研究进展

介绍了近年来采用煤粉炉粉煤灰作为原料制备氧化铝的预处理活化工艺技术,指出了粉磨法、硫酸法、氯化钙法、铵盐法、碳酸盐法、氟化盐法、物理-化学联合活化法的优缺点及在工程转化过程中需重点关注的环节。虽然部分工艺技术实现了工业化,但因成本高等因素导致项目关停,建议粉煤灰综合利用研究方向应以工程转化难点问题为导向,理论研究与工程设计相结合,逐步探索出一条经济效益好、安全环保的粉煤灰制备氧化铝工业化路线。     

利用测井资料识别碳酸盐岩裂缝的方法

在碳酸盐岩地层中,裂缝是非常常见且十分重要的一类储集空间类型,对油气的运移和聚集有非常重要的作用。因此,裂缝的识别显得特别重要。本文以新疆某油田为例,通过岩芯观察及成像测井资料与常规测井资料进行比对,总结出了不同类型裂缝对常规测井的不同响应特征。通过实际应用,识别效果良好,证明用测井方法识别不同类型的裂缝是可行的。     

模糊PID算法在回转窑的喂煤量—烧成带温度控制系统中的应用

喂煤量-烧成带温度控制系统是回转窑生产的一个重要组成部分,但其具有大惯性、纯滞后、非线性等特点,常规PID控制算法难以对其生产温度进行准确的控制。文章提出的模糊PID控制器是将模糊控制与传统PID控制相结合,用模糊控制理论在线整定PID控制器的比例、积分、微分系数。仿真结果表明,该控制器在响应速度、稳态精度等方面均优于常规PID控制器。     

Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.